Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dickinson, TX
Gate access control in Dickinson means keypads, intercoms, and card readers that have to survive bayou flooding, Galveston Bay salt air, and clay soil that moves more than the gate itself. Most Dickinson homes were built between the 1970s and 1990s, and many added automated gates after Hurricane Harvey reshaped how people think about driveway security. We work on all of it, and we put the price in writing before anyone picks up a tool. Call (346) 315-4812 and a live person answers, day or night.
Why Dickinson Homes Are Different
Dickinson sits directly on Dickinson Bayou, and the 2017 Harvey floods submerged entire residential streets for days. Automated gates in low-lying yards took on water that destroyed control boards, seized motors, and started rot in wooden posts that is still showing up eight years later. The rebuild wave from 2017 to 2019 produced a large batch of replacement gates, and those gates are now hitting their first major repair cycle all at once. Salt air off Galveston Bay accelerates rust on iron hinges, steel posts, and weld seams measurably faster than neighborhoods twenty miles inland. Properties along FM 517 and FM 646 in AE or X500 flood zones often have gate opener pedestals mounted above base flood elevation to satisfy Galveston County permit inspections, which is a detail out-of-area contractors miss. Older ranch homes from the 1970s through 1990s commonly used pressure-treated wood posts set in clay-heavy soil that heaves seasonally, pulling gates out of alignment and stressing hinges until something gives.
Our Main Dickinson Services
Dickinson homeowners call us most often for these three jobs. Each has its own page with details and pricing.
Gate Repair in Dickinson
Gate repair here usually starts with a gate that will not open, a sagging leaf that drags on the driveway, or a motor that hums and does nothing. In Dickinson, we regularly find bayou moisture has corroded hinge bolts and swollen wooden posts enough to throw the gate out of square. We diagnose the mechanical fault, name the parts, and write the price before work begins. Our Gate Repair in Dickinson page covers the common failures and what they cost.
Gate Installation in Dickinson
New gate installations in Dickinson have to account for flood plain elevation, clay soil, and the salt air that will eat cheap hardware within a few years. We set posts deeper than standard practice, seal enclosures, and document the entire install with photos so future repairs do not start from scratch. See the full scope on our Gate Installation in Dickinson page.
Gate Motor & Opener in Dickinson
Opener failures in Dickinson often trace to control boards that sit too low and take on water, or wiring harnesses corroded by humidity and salt. We service LiftMaster, DoorKing, Elite, FAAC, and five other automation brands rather than steering you toward a replacement motor. Our Gate Motor & Opener in Dickinson page lists the common faults and pricing ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Dickinson
Gate access control in Dickinson is about putting a keypad, intercom, phone entry, or card reader on a gate that has to keep working through flood warnings and August humidity. Homes rebuilt after Harvey commonly added access control as part of the security response, and the first generation of those keypads and readers is now failing from moisture intrusion and salt corrosion. Our Gate Access Control team works on nine automation brands, so the existing motor on your property stays in place unless it is genuinely beyond repair.
Keypad Entry
Signs you need it
Codes stop working, the keypad face fills with condensation, or buttons stick in the salt air and refuse to register.
What it costs in Dickinson
Keypad entry replacement in Dickinson typically runs between $145 and $475 depending on whether the wiring is intact and the housing can be reused.
How we do it
We test the circuit at the keypad and the control board, replace the faulty component, re-enter the code, and photograph the new settings for your record.
Video Intercom
Signs you need it
The video feed drops during wet weather, audio crackles with static, or the outdoor station shows corrosion around the speaker grille.
What it costs in Dickinson
Video intercom replacement in Dickinson generally costs $350 to $1,475, with the spread driven by wired versus wireless and camera resolution.
How we do it
We mount weather-sealed hardware rated for coastal exposure, run or verify the wiring, pair the monitor, and leave you a photographed record of the entire job.
What Gate Access Control Costs in Dickinson
| Item | Typical range in Dickinson |
|---|---|
| Keypad entry replacement | $145 - $475 |
| Remote control or receiver setup | $95 - $250 |
| Video intercom system | $350 - $1,475 |
| Service call | $45 - $95 |
Can you add a keypad to my existing gate opener?
Yes, in most cases. We wire the keypad into the existing control board on any of the nine brands we service, then program codes on-site and document the settings. The typical job runs $145 to $475.
What happens to my access control when Dickinson floods?
Low-mounted keypads and boards can short and die after bayou overflow. We recommend elevated or fully sealed enclosures for properties in AE and X500 flood zones, and we photograph every installation so recovery after a flood is faster and cheaper.
Gate Parts & Welding in Dickinson
Gate parts and welding in Dickinson usually means corroded hinges, posts rotted or heaved out of plumb, or weld seams rusted through by Galveston Bay salt air. Older ranch homes on clay-heavy soil develop chronic misalignment that stresses hinges until they snap, and post-Harvey replacement gates often show early rust on factory welds that were never sealed for coastal conditions. Our Gate Parts & Welding work replaces the failed component and leaves a written record of the part number and the weld position so no future technician has to guess.
Hinge Replacement
Signs you need it
The gate leaf sags, scrapes the driveway, or shows orange rust weeping from the hinge pin.
What it costs in Dickinson
Hinge replacement in Dickinson typically runs $85 to $315 per hinge depending on size, material, and whether the post is sound.
How we do it
We remove the old hinge, inspect the post for rot, fit a corrosion-resistant replacement, and photograph the finished mount.
Post Replacement
Signs you need it
The post leans, wobbles when the gate moves, or shows soft wood or flaking rust at the base.
What it costs in Dickinson
Post replacement in Dickinson generally costs $200 to $700 per post, with steel posts at the high end and wood at the low end.
How we do it
We set the new post deeper than standard to resist Dickinson’s clay heave, backfill with concrete, and document the depth on the job record.
What Gate Parts & Welding Costs in Dickinson
| Item | Typical range in Dickinson |
|---|---|
| Hinge replacement | $85 - $315 per hinge |
| Post replacement | $200 - $700 per post |
| Custom welding repair | $125 - $600 |
| Gate roller replacement | $95 - $350 |
Can you weld a gate without replacing the whole panel?
Yes. We grind back the rust, weld the cracked seam or broken joint, then coat and seal the repair for coastal exposure. Custom welding repair runs $125 to $600 depending on the length and access.
Do you replace just one post or do I need both done?
One post is often enough if the other is sound. We check both, measure the plumb, and give you a written price for only what needs to be done, usually $200 to $700 per post.
Brands We Service in Dickinson
We work on LiftMaster, DoorKing, Mighty Mule, FAAC, and five other automation brands. Common control boards and remotes are stocked in our Houston warehouse and arrive on Dickinson jobs quickly. See our brands for the full list.
Pricing for Gate Repair in Dickinson, TX
| Service | Typical range in Dickinson |
|---|---|
| Service call (shows up and diagnoses) | $45 - $95 |
| Keypad entry replacement | $145 - $475 |
| Remote control or receiver setup | $95 - $250 |
| Video intercom system | $350 - $1,475 |
| Hinge replacement | $85 - $315 per hinge |
| Post replacement | $200 - $700 per post |
| Custom welding repair | $125 - $600 |
| Gate roller replacement | $95 - $350 |
Prices in Dickinson run higher on flood-zone properties where openers must be mounted above base flood elevation and on jobs where salt corrosion has spread from one component to its neighbors. Every price is written and handed to you before any work starts, and it does not change unless the scope changes in writing.
Neighborhoods We Serve in Dickinson
We cover the whole Dickinson area, from bayou-front streets to the FM 517 and FM 646 corridors. Typical response in Dickinson is same-day for most repairs, with a live person on the phone around the clock to schedule it.
- Bayou Bend
- Pine Drive
- Oak Hollow
- The Lakes
- El Dorado
Service Area - Cities Near Dickinson
Our crews serve Dickinson and the surrounding communities along the Galveston Bay shoreline. If you live just over the city line, we also cover Bacliff, TX, League City, TX, Seabrook, TX, and Webster, TX.
Serving Dickinson, TX - Our Local Coverage Area
We’re based in the Dickinson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dickinson
Most Dickinson repairs are same-day. When you call (346) 315-4812, a live person confirms the address, dispatches a background-checked technician, and sends you the name and photo before arrival. We do not route you to a voicemail queue.
Most repairs and replacements on existing gates do not need a permit, but new installations on AE or X500 flood-zone properties near Dickinson Bayou may require the opener pedestal to sit above base flood elevation. We handle the Galveston County requirements on every job.
No. The price we hand you in writing before starting is the price you pay. If hidden damage requires a scope change, you get a new written price before that additional work begins. That is the entire point of how we run every Dickinson job.
Call (346) 315-4812 for a free estimate on any gate repair, access control, parts, or welding job in Dickinson. A live person answers, the price goes in writing, and the work is done right or covered by our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dickinson Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.